Skip to main content

Customer Facing Display (Serial)

Xenial Cloud Portal Data Management Ordering Settings Hardware Peripherals

To define settings for a customer facing display with a serial connection:

  1. From the upper-right of the Peripherals area, select New Peripheral.

  2. From the Peripheral Type dropdown, select Customer Facing Display.

  3. From the Peripheral Schema dropdown, select Customer Facing Display.

  4. From the Connection Type dropdown, select SERIAL.

  5. Select Continue.

  6. Locate the Peripheral Type section.

    • Toggle Active to Active if the device is available for use at the site.

    • Multi-site users: To the right of the field, select the globe icon to define values for each site.

  7. From the Peripheral Configuration section, define the following:

    Setting

    Description

    Peripheral Name

    Type a name for the device.

    Welcome/Idle Line 1

    Type a message to welcome customers to the store. This message appears on the first line of the display when the device is idle (i.e. not displaying order information).

    Welcome/Idle Line 2

    Type an extended message for customers (if desired). This message appears on the second line of the display when the device is idle.

    Closed Line 1

    Type a message to indicate the terminal is closed. This message appears on the first line of the display.

    Closed Line 2

    Type an extended message to indicate the terminal is closed (if desired). This message appears on the second line of the display.

Connection Configuration

To add and define a set of network configuration options:

  1. Locate the Connection Configuration section.

  2. From the upper-right of the Configuration Set section, select Add Set.

  3. From the Network Configuration Set Options window, define a set of network configuration options.

To assign a configuration set to sites:

  1. From the Configuration Set section, locate the configuration set.

  2. From the 3-dot menu to the right of the configuration set, select Edit Site Assignment.

  3. From the Assign Sites for Serial Configuration Set window, select the sites.